Contents:
______________________________________
Time to remain open
The Time to remain open setting lets you control how long the door remains open when using the Open Then Close command, motion detection, or any connected device to activate your Wayzn Smart Pet Door.
In the Wayzn app on the home page select the Wayzn device you wish to modify. Once on the device page, use the ellipsis in the upper right corner to access the menu, then select Settings.
On the Device Settings page locate the Time to remain open setting and use the corresponding drop down arrow to select the desired length of time. The actual duration may vary from the number you select based on the size of your door so you may need to experiment to achieve the exact duration desired.
Selecting the Remain Open option will mimic the Open command and cause the door to remain open indeifintiely until you issue a Close command.
______________________________________
Inches to open
The Inches to open setting lets you reduce the width of the door opening, if desired. This setting is used by your Wayzn Smart Pet Door every time it opens the door.
In the Wayzn app on the home page select the Wayzn device you wish to modify. Once on the device page, use the ellipsis in the upper right corner to access the menu, then select Settings.
On the Device Settings page locate the Inches to open setting and use the corresponding drop down arrow to select the desired opening width. The maximum width listed is determined by the size of your door and can not be increased. The actual opening width achieved may vary from the number you select based on the size and design of your door so you may need to experiment to achieve the exact opening width desired.
______________________________________
Operate with button
The Operate with button setting lets you control how the button on your Wayzn Smart Door works. When this feature is disabled, pressing the button on your door opener will have no impact except when the door is closing. While the door is closing, pressing the button will stop the door and re-open it.
When this feature is enabled, pressing the button on your door opener will have the following effect:
- While the door is closed, it will initiate the Open command.
- While the door is open, it will initiate the Close command.
- While the door is closing, it will stop the door and re-open it.
- While the door is opening, it will stop the door and re-close it.
Note: Use a short press on the button to operate your Wayzn Smart Pet Door. Avoid holding the button down for an extended period of time unless you are trying to re-set and re-add your device to the Wayzn mobile app.
In the Wayzn app on the home page select the Wayzn device you wish to modify. Once on the device page, use the ellipsis in the upper right corner to access the menu, then select Settings.
On the Device Settings page locate the Operate with button setting and slide it to the right to enable this feature.
Comments
0 comments
Please sign in to leave a comment.